-
Sharing script to set dual monitors position카테고리 없음 2019. 1. 14. 14:06728x90
xrandr is a utility to set resolution and layout of multiple monitors.
Let me share my resolutions.
bkk@bkk-dt:~/bin$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.00*+
1600x900 60.00
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94* mylayout.sh
#!/bin/sh
xrandr --output DVI-I-2 --mode 1920x1080 --pos -1920x0 --output DVI-I-3 --primary --mode 1920x1080 --pos 0x0Let me explain each arguments.
--output : port of graphic card, 'DVI-I-2' in here
--mode : what resolution you want to use, '1920x1080' in here
Please see that '--primary' is not used to 'DVI-I-2', it means that 'DVI-I-3' is primary monitor.
--output : DVI-I-3 is primary monitor as '--primary' is given
--mode : Resolution, 1920x1080
--pos : 0x0
* Two monitors layout
Monitor / DVI-I-2 Monitor / DVI-I-3
***************************|***************************
* (-1920x0) *|* (0x0) *
* *|* *
* *|* *
* *|* *
***************************|***************************
728x90